Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What is the upgrade path from IOS 17.6.3 to 17.15.5 for the IE3200 switch?Is it direct or are there recommended interim IOS versions one must upgrade to reach the final goal?
7206 with IO controller and PA-FE-TX running c7200-is-mz.123-14.T2.bin connected to a 2924XL running c2900XL-c3h2s-mz-120.5-XU.bin. Excessive input errors experienced on 2924XL switch port from router:TGP-PRODSW#sho int fa 0/24FastEthernet0/24 is up...
This document says how to upgrade but not what interim steps may be necessary (unless I missed it).I've been all over this document long before posting...
Router doesn't support the speed command. Switch was originally connected to the integrated Fast Ethernet port on the I/O controller. Added a PA-FE-TX to the chassis with no change. Tried different switch ports in the original switch with no chang...
'show int status' command not supported in this version of IOS.Switch:interface FastEthernet0/24 description TGP Production Router Fa 4/0.1 duplex full speed 100 switchport trunk encapsulation dot1q switchport mode trunk!Router:interface FastEthernet...
