Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
is there a way to configure some sort of extended service check (i.e. send string to look for particular web page) on the CSS switch to member servers on a specific pool?
is it possible to configure the AUX port so that an external modem can be connected to it so that one can dial in to the router via a pots line.thanks.
i am seeing the connect/disconnect time from a "sh call history voice" command that shows large number for the call connect and call disconnect fields.(see bellow)1. how can one display instead make it display the actual date/dime of cann connect and...
i have a VoIP GW (cisco5300) configured to logg VoIP call related messages to a radius server, i am interested in particularly know the meaning of the following messages..h323-disconnect-cause = "h323-disconnect-cause=1F"h323-voice-quality = "h323-vo...
i need to have the radius information logged to tow servers for redudancy requirements.if so what would be the sample radius part config on the cisco box?thanks.
i monitored the ftp session from the client side and saw the correct sorc/dst IP pairs and the server using the ftp port..(client is webproxy07, server is 207.251.71.198), the client initiates the connection inbount to the router..Using device /dev/q...
