Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have a 3640 configured with Lock-and-key Security (Dynamic Access List) Installed IOS is:c3640-is40-mz_120-2a.binHere a extract of the config: aaa authentication login user tacacs+access-list 158 dynamic coxa permit ip any anyaccess-list 158 pe...
Hi, I have a pix 506 running ver 6.2(1), PDM Ver 2.0(1), 8Mbytes Flash, 32Mbytes Ram.After some configuration change (3DES VPN) via telnet when I try to use PDM I receive the following error message:Unsupported CommandsThe Cisco PIX Device Manager (P...
Hi, if I try to download IOS for 4006 Sup Eng III ENHANCED FEATURE (go to link down, then select any available release then agree), I find that the IOS Feature is BASIC L3 SW FOR C4000 SUP III.http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-...
Hi, I have a customer that has some strange problems on a ISDN Line, attached to a Cisco 1751. Does anyone has some idea about the meaning of the "MPH_EI2_IND" message?Thanks,Leonardo00:11:33: ISDN BR1/0: L1 ERR IF_ACTIVE00:11:33: ISDN BR1/0: Recvd ...
I have exactly the same problem.
Seems that the last version of the compatibility matrix (updated Dec 05, 2016) stil does not contain info about C3850-NM-4-10G
Hi,Probably IOS c3640-is40-mz_120-2a.bin (IP PLUS 40) has the same bug you showed me for the AS5300.We upgraded to ver 12.0.(24) and the problem seems solved.Thank you very much,Leonardo AvellaCCNP - Cisco Certified Network Professional
Hi,what about the "ip route-cache same-interface" command?Is it possible to use it on the Cat4k Switching engine III?Where I can find some configuration example for this new module?thanks a lot,Leonardo
