Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a 2950T switch connected to 3550 12T switch.On the 2950T switch the 100BT ports are used for uplinks from other switches catalyst 2924xl. PC's on the switch FTP to server on the 3550. For a get they have speeds of 5000-6000 bytes per seconds...
Is it possible to have PIX firewall connected the internet allow WEB most of the time. then todisallow internet access and allow access to a backup server at a fixed time each day? The research I have done indicates this is not possible directly ...
I have found a resolved caveat for my problem. This causes slow forwarding so could cause your problem but it says ftp. Up and try itTHe problem is resolved in 12.1(13)EA1bCSCea56745 When full-duplex mode is manually configured on a switch interface ...
Broadcast's are about 1% and multicasts less traffic never gets very high. A couple MBits per second at the mostgt-corpbb-06d#sh int f0/3FastEthernet0/3 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 000a.8a58.6a03 (bia...
