About gsebk

gsebk · 04-30-2004

Hi,I use a VPN3005 concentrator that is accessible through the internet. At home I use my phone line with modem to connect to the internet and the VPN client 4.0.4. to connect to the corporate LAN through the VPN3005. My question is: how could I mana...

gsebk · 04-29-2004

Hi,I have configured on PIX the DHCPRelay function. See the attached config. The PIX uses a VPN tunnel to the remote site 192.168.18.0/24 on which there is a DHCP server. The PCs behind the local PIX are DHCP clients. I have tried the config in our t...

gsebk · 04-22-2004

Hi, I use PIX501s with os6.3(3). They are connected to the internet through ADSL (pppoe). The firewalls are deployed in hub and spoke network in the center of which there is a VPN router 7140. Among the sites there are VPN site-to-site links. In all ...

gsebk · 04-22-2004

Hi, I use pix501s with os6.3(3) on two sites. the PIXs are connecting to the internet on ADSL (pppoe). Between the two PIXs there is a site-to-sit VPN tunnel. The computers in one site must be able to get DHCP addresses from the DHCP server in the ot...

gsebk · 04-07-2004

Hi all,I'm not too familiar with the new OSPF routing function on ver. 6.3. I should solve that a few PIXs can advertise their inside subnets for the other PIXs. The firewalls are connected with their outside interface to the internet (PPPoE, ADSL). ...

gsebk · 04-26-2004

Hi,the solution is that i have found a bug in the PIX OS: http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCec13051&cco_product=PIX+Firewall&fset=&swver=&keyw=icmp&target=&train= In case of pppoe and VPN together the PIX doesn't sends ...

gsebk · 04-23-2004

Hi, thanks for suggestion. I hav tryed to modify both the inside and outside MTU on the PIXs to the same 1454 and after it to 1100 but it doesn't work. The symptoms remained the same: the PINGs can get through but not the microsoft protocols (ie. RPC...

gsebk · 04-09-2004

Scott, anyway it would be nice to have the possibility to push the OSPF traffic into a VPN tunnel. The enterprise customers that have multiple premises would appriciate this function.Thanx for infos.Regards,Gabor

gsebk · 04-09-2004

Tahnks a lot for your answer. All the PIX devices are connected to the internet directly.The main problems are not the authentication and the spoofing but how will find the pix devices each other on the internet. That's why the neighbor function woul...

gsebk · 12-02-2003

Of course the outside address of the PIX. Meanwhile the problem has been solved. I don't know why it works now but it works. I have reentered the whole config on the PIX and it works. Befor this I used the clear xlate but didn't help.Anyway there wer...

Member Since	‎08-02-2002 05:04 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	25

User Statistics

User Activity

Auto initiation of VPN client on Windows

DHCPRelay on PIX

MTU on ADSL line through VPN

DHCPRelay through VPN

OSPF routing on PIX

Re: MTU on ADSL line through VPN

Re: MTU on ADSL line through VPN

Re: OSPF routing on PIX

Re: OSPF routing on PIX

Re: double SMTP translation