Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco 3640 router with 4-port Channelized E1 inserted. One of these E1 ports is used as an ISDN PRI connection to Telco for ISDN backup purposes. Branch offices, who are able to dial using ISDN BRI interfaces, try to connect to E1 PRI port.H...
There are 4 ISDN PRIs on AS5300, and 3 of them are active at the moment. First PRI comes from Telco, the others are for local use and come from local PBX. The dialed numbers of each are different. Users call 5224300 (DID number of first PRI) and are ...
I need help on AUX-Modem-Dialing configuration !On my local side, I have Cisco 3640 with one PRI port, 30 mica modems configured. On the remote side, there is AS5300 device but the PRI interfaces are used for some other purposes. Just to manage that ...
I need help on AUX-Modem-Dialing configuration !On my local side, I have Cisco 3640 with one PRI port, 30 mica modems configured. On the remote side, there is AS5300 device but the PRI interfaces are used for some other purposes. Just to manage that ...
Hello to all, I need a s/w tool which will be capable of capturing and monitoring the netflow analysis of Cisco routers by utilizing 'net-flow' caching mechanism. I know there are such tools, but I am not aware of the on going strategy of Cisco syste...
You should use "dialer-list" command in your configuration to trigger BRI interface for forwarding EIGRP packets. If it is present, can you check your interesting traffic definitions? Posting some part of the configuration may be useful..Onur
Hello to all,The same kind of problem occured in our PIX 520. PIX Firewall version is 6.2(2) and PDM version is 2.1(1). Five different VPN tunnel is currently working on it and we use that PIX as an external firewall. It seems that at the time we cha...
While I am just reading the article, you send the message. Wouvv, so fast. I have checked the commands under the "line", however there is no such a command. What should I do next? IOS upgrading?Thanks,OnurIOS of my AS5300 is "c5300-is-mz.121-4.bin".I...
