Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have been trying to find a way to configure the call settings in the Cisco ISR 2911 to call an (overseas) number using an extension number. It is not the "call-forwarding all (target number)". I was wondering if anyone can help me with this as ...
I wish to implement HSRP for this design, however when I remove Router 2(R2) from the network, the SVR1 is unable to ping SVR2. I have HSRP configured on R2 and R3, and the routers show that the virtual IP configured is active and is on Active and S...
Hi Georg, My work is based in Singapore. If I require to call to America, do I change the "destination-pattern 9019T" and "prefix 019" ? And can I assume that the extension number is in the header "dial-peer voice xxxx pots" xxxx will be 1234 for exa...
Hi Georg, Below is an example of my config !voice translation-profile pstntranslate calling 1!!dial-peer voice xxxx potscorlist outgoing IDD <--For my international calltranslation-profile outgoing pstn destination-pa...
Update: I found out there is a problem that will arise, called Asymmetric loop. I added another Fast Ethernet connection between R2 and R3, and it solved the ping from SVR2 to SVR1. But now there is another problem. When I remove the cable from SW3 ...
