Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings Everyone. One of my customers asked me to configure a WLC 2106 and 2 LAP 1131AG (lightweight) for corporate/guest Wifi. Basicly they want to implement a good wifi connection for internal use and a guest one with different QoS. The two lanss...
Stephen,The APs are directly connected to the controller. When i change the IP from the GUI the AP simply disappear and start sending request to the AP-manager interface which is on another subnet. Any hints?OT: i ran in another problem today, i put ...
Scott, I've tried the solution you provided me, but unfortunately with no results. I've set the AP2 in the same subnet of the management, ap-management and AP1 (192.168.10.x/24) AP2 joins the controller and broadcast SSID and IP correctly thanks to t...
Good Day Everyone.After a long fight, the insights of Stephen and Scott and:https://supportforums.cisco.com/docs/DOC-13960 and https://supportforums.cisco.com/thread/2003153 I finally managed to wipe the old configuration and to configure a LAP 113...
Hello Stephen and thank you for your reply.1) I've tried to inform the AP of the WLC ip address via internal DHCP and using a W2k8 R2 machine with Dns and Dhcp (but no option 43) in both cases no results.2) Ok, i'll stop worrying about the mesh files...
