Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey guys,
I got dot1x wireless deployment of Cisco WLC 5500 and ISE. Currently we have centrally switched WLAN with 2 VLANs Data and Remediation and all work fine. we need to make the Data VLAN local breakout while keeping the Remediation VLAN cen...
Anyone lost the to 5508 WLC while upgrading to version 8.3.133. The new image uploaded fine then the WLC rebooted but sadly stuck at one stage (License daemon running) and I became unresponsive to serial input!!Cisco AireOS Version 8.3.133.0Firmware ...
It has been solved by sending VLAN ID# from ISE not the VLAN-name despite the VLAN is defined in "FlexConnect VLAN Template" while it is fine to send the VLAN name for the VLAN's that are presented on the AP
Do not know what is the sense of this s...
Hi Rasika,
It has to behave like described in step 1 as the VLAN is presented on the WLC but not on the AP and this feature is enabled. But what is happening that it is being switched locally using the default VLAN (data) presented on the AP. So it ...
it is working fine if both VLANs (Data and Remediation) are centrally switched and if both are locally switched. but not when I try to use the "VLAN Based Central Switching" to switch the remediation centrally by not presenting this VLAN on the AP
If both Data and Remediation are locally switched ( both VLAN are presented on the AP) then all good also if both are centrally switched ( flexconnect local switching not active on the WLAN ) but when I try to do the remediation centrally (not presen...
