Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
George,it seems that You are missing a linemodem autoconfigure discoveryunder line aux0 configuration, also try to add the following commands under line aux0:no flush-at-activationno exectransport preferred nonetransport output noneautohangupI have t...
Neil,as You can see here,Modem hardware state: noCTS noDSR DTR RTS Modem type is unknownYour modem is not detected and configured by the router, thats why it is not answering Your calls.You either have faulty or incorrect cable, faulty modem or there...
Neilwhat is output of command show line 2 or show line 3 ?You should see something similar: Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns IntI 114 TTY - inout - - - 1 0 0/0 -Lin...
Hi,You are missing the following lines under Your line 2 3 configuration: modem autoconfigure discovery transport preferred none transport output nonespeed 38400HTHRegardsGiedrius
