Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How can you restrict SSH access to a Nexus except from a specific subnet? i know how to do this on an IOS device but don't see the access-class statement on the Nexus.TIA
Simple network consisting of a 6506 switch with about 75 vlan interfaces. Want to add v6 to the interfaces for a hybrid network. V6 users need to access the Internet on v4. Question 1 - Documentation is pretty clear on how to configure NAT-PT to g...
Running a 6509E ver 12.2 (33) SXH, with the default setting for MTU (9216 on all switch ports) and set consistently throughout the configuration. the devices directly attached have 8000 configured as MTU (these are a Sun E25K and a NetApp filer). T...
I have a situation that I need the ACE to re-write a portion of the client header. I can configure the class-map to identify the traffic, but am unsure how to configure the policy map. The client header contains an sid value and we want the header ...
When using any loadbalancer, CSS, CSM or ACE and doing SSL offload, how does the request to the backend server get created? For example if the client requests https://secure.example.com/privatedata.html and that url is configured for SSL offload on ...
I tried messing around with COPP with no luck. Any other thoughts?Also, Are there ways to similarly restrict SNMP and HTTPS access to a selected group of hosts/networks?Thanks
My quickest way is to write out eh addresses in binary. Then you can compare digits from left to right to find the longest match, which then becomes your supernet. For octects that are the same you don't have to write them all out.Example:a) 192.16...
My experience leads me to suspect a power issue or hardware failure. In the show version command you should see a line like this:System returned to ROM by power cycle at 09:37:31 UTC Tue Jan 8 2008 (SP by power on)If this says you had a reboot due ...
