Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,It is possible to build a VPN tunnel between a Router 831 and a concentrator 3000 when the traffic is going accross a ADSL router using a port translation?.What I have:1. the Router 831 will get a dynamic extern address (from adsl router)2. the...
Hello,I have to build a tunnel between a Router 831 and a VPN Concentrator 3005.The router is connected to an ADSL Modem , The ADSL Modem give him a dynamic IP adress and make a NAT.On the Concentrator side, I have a FW with 3 interfaces.My first que...
HalloI have a router going to a pix501 (vpn) and this pix is going to another FW (vpn).My goal is to bring protected info from behind the router to behind the second FW, using the pix as a "hub". ->Spoke -> Hub -> SpokeI read on the forum from Aamir ...
Hello,When I use the command "crypto isakmp key balbla add 1.1.1.1" and then make a show runThe key stay in clair text. Do somebody know how to make it unvisible like in a PIX?ThanksGael
I found the solution. Hi everybody, for people interested.If you want to use nat overlapping (PAT), then you can use easyvpn and configure Nat-T on the concentrator (System -> Tunneling protocol -> Ipsec ->Nat-t). It's maybe possible to create a tunn...
Hi everybody,For people interested, I found the solution.If you want to use nat overlapping (PAT), then you can use easyvpn and configure Nat-T on the concentrator (System -> Tunneling protocol -> Ipsec ->Nat-t).It's maybe possible to create a tunnel...
Hi,I found my mistake (Xtauth), it now work with static nat but as I thaught, not with port translation.Is it possible to use IPSEC with port translation?Cheers.Gael
HiI tried the document you gave me, but I always got those debug message and I doesn't work.Do you have any Ideas why?Target IP address: 172.19.0 6.0.1Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: ySource add...
