Hi,I've this conf on a central router : sig-part-b#sh run int s2/0:15Building configuration...Current configuration : 453 bytes!interface Serial2/0:15 no ip address encapsulation ppp ip mroute-cache dialer pool-member 1 max-link 2 dialer pool-member ...

Hi,I just want to know if there is possible to make a minimum of links allowed to a connection to a branch site.Ex : 10 links immediately up for a connection With the "load-interval" command each link become up with a latency of 30 sec.Is there the...

Hi,I meet a problem when I've activated a New PVC : In this configuration : SIG_________Cloud FR________LYON-AA pvc (1536 BW) has been created between this two devices DTE.After this, LYON-A received FECN packets from SIG (all packets IN are equals ...

Hi,Do you have already met this type of problem :In a routing process, there is no way to route a packet to a network @ destination which is for example 10.141.1.255/16.So this is not a broadcast address but anyway it's not routed (ICMP time out) ......