About emelville

emelville · 03-06-2006

I have a 500 node MPLS network. All the remote routers are 2811's and all the remote traffic terminates here at the central site on a 7606 with a DS3. We have implemented service policies in all the remote routers and they seem to be working well. ...

emelville · 08-28-2007

I don't understand why you don't recommend using QOS at the central site. You need to tag the outbound packets from the hub to ensure reliable deliver to the remotes. Otherwise, everything would be seen as "default" and subject to whatever the carr...

emelville · 08-27-2007

Yes - I would be interested in doing that. Sounds like your network is almost identical to ours!Is there some way to PM you my contact info?

emelville · 08-27-2007

Not really - WRED seems to be working well for most applications. I still believe that micropolicing on a per hub site basis is the ultimate solution.

emelville · 03-06-2006

After re-reading the documentation again, it looks like this may work, as it does support masking the destination addresses.

emelville · 03-06-2006

Yes - that is exactly the problem. I didn't word it very well!MicroFlow Policing looks like a good option, but I need to define ranges of address (i.e. 10.131.45.1/24) to define the source addresses of the remote hosts. It didn't look like I could ...

Member Since	‎10-17-2002 04:21 PM
Date Last Visited	‎04-05-2018 01:18 AM
Posts	8

User Statistics

User Activity

Difficult QOS problem

Re: Difficult QOS problem

Re: Difficult QOS problem

Re: Difficult QOS problem

Re: Difficult QOS problem

Re: Difficult QOS problem