I have a Windows Server 2016 DHCP setup on my first switch.  The DHCP server has LAG setup on 2 ports with LACP enabled.  The devices(pcs,laptops,printers) on the first switch all are able to get DHCP addresses from the server and are pingable.  My 2...

Hi all,I am trying to setup an Anyconnect VPN so my home users can remote to the internal network.  I have gone through and configured it through the Anyconnect Wizard but it will not let me log in through the Anyconnect client I installed. I used in...

Hi all, I am in the process of isolating a Vlan from the rest of the network.  I only want this Vlans end devices to be able to go to the internet and nothing else.  I have looked at the GUI for private Vlan creation but I was also wondering if it wo...

I cant seem to get my switches to ping out to the internet.  I have my router configuration below along with switch configuration.  My setup is as follows   ISP > ASA(192.168.2.1) > L3 Router(192.168.2.2) / interface to sw from router(192.168.1.3) I ...