Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to double NAT an Aironet 1815i access point. I have 3 of them and they are using the Mobility Express firmware, with one of the APs acting as the controller. I'm logged into the web portal, I create a DHCP pool on a different subnet from o...
I've loaded multiple firmware versions to an 1815i access point in an attempt to get it to work since many of the images are buggy. It is not saying it is out of space and cannot save the config file. What commands can I run to remove the unused firm...
Hello all:
I've converted a couple of these things in the past with no issue but when I go to convert this 1815i over from CAPWAP to Mobility Express using this line:
ap-type mobility express tftp://x.x.x.x/air-ap1815-k9-me-8-6-101-0.tar
I get an er...
Actually I figured it out. I did the archive download cmd of the mobility express first then ran the ap-type mobility-express tftp cmd and then once more ran simply the ap-type-mobility-express cmd and it works now
I had same issue. Here's how to convert:
1)You need to download the mobility express firmware for your device
2)Use a TFTP software (I used TFTPD64) to host the firmware (keep it in the .tar format)
Tip: Google setup instructions for using TFTPD i...
