About dogiii

dogiii · 08-08-2018

Hi guys, I am having an issue with NAT on two ASA´s. We are supposed to use twice NAT on both of sites (same office site , 2 different ASA´s on 2 different locations)so internal users from one internal site can connect to the other site. ON one of ...

dogiii · 03-28-2018

Hi guys, I have a problem with my ASA. The problem is as follows. We have new Subnets in the 192.168.x.x range. Our current setup is with 10.0.0.0 /8 range. From the core switch all the vlans have been configured and work so far. However the new ...

dogiii · 12-18-2017

Hi guys, I have a problem. I am trying to configure a VPN between 2 remote sites . One is our ASA and the other is a stormshield. Our ASA has a public IP address and behind it are some Internal ip addresses . The Remote Site has a Stormshield FW w...

dogiii · 08-14-2018

Hi Aron, I made it easy on myself and drew this up. Sorry for the late response. It is simple I am trying to communicate from 192.168.22.140 to 192.168.16.110 on the other side. But somehow whatever I do it doesnt work. If you could take a look at ...

dogiii · 03-29-2018

I figured it out. The barracuda proxy was just missing a route to the new internal subnet. Having 0 know-how for barracudas this took me some time :) Thanks for your help anyways!

dogiii · 12-18-2017

Well, are they going to be able to communicate to each other ? Since these are public ip addresses and those are internal ip addresses...

Member Since	‎12-18-2017 04:58 AM
Date Last Visited	‎08-17-2018 12:04 AM
Posts	6

User Statistics

User Activity

2 Servers behind 2 ASA´s

ICMP Inspect seq num not matched

VPN Internal Subnets to Public Subnets between 2 FWs

Re: 2 Servers behind 2 ASA´s

Re: ICMP Inspect seq num not matched

Re: VPN Internal Subnets to Public Subnets between 2 FWs