Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have two backup servers. a 2950 switch.connected to the 2950 we have about 15 client servers, 5 internal servers and two backup servers.Could anyone give me some advice on what I will need to setup the switch so that our 5 servers can communicat...
Hi,I currently have a pix classic, i am using this to learn - testing.I would like to be able to upgrade to the latest PIX OS, (the classic can only support ~5.1)I have about 10 PC's on my Home Lab. I do not want to purchase anything fast, expensive....
Hi,I am trying to open port 80 (www) on my pix and forward any requests to my internal web server (192.168.0.150)I am running Pix V 5.1(5) on an old pix classic (testing)I am not having much luck opening the port.I have 200.220.230.136/29 assigned to...
Hi I have a 2900 Series Switch, and would like to setup the following. I think I will require a router to do this, but would like to confirm this. I have a backup server that is connected to the switch on port 1. I have about 20 other servers that ar...
HiI have a 2900 Series Switch, and would like to setup the following. I think I will require a router to do this, but would like to confirm this.I have a backup server that is connected to the switch on port 1. I have about 20 other servers that are ...
Just checked our 2950’s they do not support the EI.We have a CAT4000 and 7200VXR. Will this assist with securing the backup switch?We do not want to use the CAT4000 for our backup switch. Could we use the 7200 to create some type of VLAN or Access li...
Thanks for your reply, was a great helpI have been think how I need to setup my lab.I think I may need a DMZ, (or not sure if i can do this with a vlan)I would like to use one interface for my lan, one for the wan, and I would like another for my liv...
We do run the backup over a seperate switch.This is the switch we would like to use for the private vlans. As some of the servers are client servers, we do not want them on our lan.From what i can see we ill need to put another nic in the server that...
