About ankit.chhawsaria

ankit.chhawsaria · 01-25-2018

Hi , In have a Cisco ASA 5550 in which I have configured Gi0/0 as 10.51.20.5 mask 255.255.255.0 I am accessing it from 172.16.20.0/24 subnet. I have NATed 10.51.20.5 to 172.16.20.5 IP. If I keep my system in 10.51.20.0/24 subnet, I am able to access...

ankit.chhawsaria · 01-12-2018

Hi, I am having a requirement of restricting multiple vendors in same zone (same subnet) from communicating with each other. How can we segregate them at firewall level. I have heard about PVLAN concept which can be implemented at Switch level. Is ...

ankit.chhawsaria · 01-09-2018

Hi, I am trying to configure an unused firewall ASA 5550. For it, I am trying to load a new image through tftp server. Its getting booted up via rommon, but I am not able to copy it to flash or disk. I am not much familiar as to how to do this in fir...

ankit.chhawsaria · 01-05-2018

Hi, I have some unused routers being kept in the datacenter. I thought of making use of it and create a lab. Now in that I have one Cisco2921 router which was configured by someone but he is no longer in our team. Now when i connect to the router thr...

ankit.chhawsaria · 01-25-2018

Hi Ajay, I have attached my network diagram. So I am trying to access ASDM on Red Firewall. So when I ping 172.16.20.5 IP, it gets NAT to 10.51.20.5 on Blue Firewall and then reaches Red Firewall. As I said, ping is working so there is no issue in NA...

ankit.chhawsaria · 01-12-2018

But if we enable communication between same security level, then the scenario will be - both interfaces are in same zone and same security level. Is it then possible to restrict via ACLs?

ankit.chhawsaria · 01-12-2018

So suppose two interfaces of ASA- lets take Gig0/0 and Gi0/1 are in same zone called ABC. End user system is directly connected to these interfaces. Gi0/0 - 192.168.1.1/30 UserA - 192.168.1.2/30 Gi0/1 - 192.168.2.1/30 ...

ankit.chhawsaria · 01-10-2018

Hi Richard, Thanks for all your help. I went through some more documents and Cisco forum discussions and was able to resolve this issue. The mistake which I was making was that once the ASA is rebooting, the Management0/0 interface is getting the 192...

ankit.chhawsaria · 01-10-2018

Hi Richard, Here is the configurations : ROUTE INFORMATION ciscoasa# sh route ?Current available interface(s): management Name of interface Management0/0 | Output modifiers <cr>ciscoasa# sh routeCodes: C - connected, S - static, I -...

Member Since	‎01-05-2018 02:59 AM
Date Last Visited	‎11-30-2022 12:05 AM
Posts	12

User Statistics

User Activity

Facing issue in accessing ASDM via NATed IP

Segregating users in same zone behind ASA

Facing difficulty in loading ios image in firewall through tftp

Not able to go into Rommon.. router rebooting in "readonly rommon only"

Re: Facing issue in accessing ASDM via NATed IP

Re: Segregating users in same zone behind ASA

Re: Segregating users in same zone behind ASA

Re: Facing difficulty in loading ios image in firewall through tftp

Re: Facing difficulty in loading ios image in firewall through tftp