Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,* When we ceate Lan to Lan tunnel in Concentrator ,a group is created for this Lan to Lan under Groups as ( L2L internally configured )Im aware that this is the way it works )When you Add or Modify a connection on these screens, the VPN Concentrat...
Hi, VPN client ---{Internet}---CVPN ---LAN* Client ( Physical IP) has overlapping network as the lan behind the CVPN.* Will there be issues ?* VPN client pool is different than the LAN behind the CVPN.* Will this Setup work.As per I know:* There shou...
Hi Mak,There is absolutely no issue with the above scenario There may be if we are PATing the router rather than nating.But still I dont think there is any issue.The packet would get encrypted at PIX 1 & would come to the router which would NAT it if...
As per my understanding ( correct me if im wrong )Site A has >> Router 1 & PIX 1Site B has >> Router 2 & PIX 2- We have existing Site to site tunnel using Router 1 & 2- We have craeted back up using PIX 1 & 2.>> Since we require all the traffic using...
Hi Frenzeus,>Are we able to ping from any other laptop/pc..this would confirm that the issue is not at the head end .If yes,so the issue is surely with the Laptop.As previosusly suggested,please check for the XP firewall.( I m aware of the issue that...
Hi Tonny,As per the issue,VPN client connecting to the PIX disconnects.There can be several issues.1> We have set the idle timeout to 5400 sec.If we dont have any traffic the tunnel would drop.Is it the case?2> Also on the VPN client on the transport...
Hi Chan,For this you would need to go to the interface you would want the cerfifcate on.Lets say it is Public interface.Go to certificate management,there under the public interface you would find few options.When you would say generate it would give...
