Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Just to clarify remember a Raid 0 Virtual Drive is not going to rebuild because there´s nothing to be rebuild. You could try creating the Storage Policy for that particular server from scratch just to be sure everything is on point:https://www....
I believe you can:scope securityscope keyring Keyring-nameset regenerate yes
commit-bufferYou can check "Configuring Communication Services":
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configuration...
-Be sure the PCIe lots are enabled on the BIOS.-Check that the cabling is being done properly, be sure that the SAS cables connect the server´s backplane to the UCSC-MRAID12G V01, short read about cabling:https://www.cisco.com/c/en/us/td/docs/unifie...
Hello Johnny B,This might be useful for your question:https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/spec_sheet_c17-644230.pdfOn page 6 "BASE SERVER STANDARD CAPABILITIES and FEATURES"You can...
Hello Perini,"On C240 servers, based on the LSI card, a server might have a BBU (Li ION based) or a SuperCAP."Source:https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/unified-computing-system/118618-technote-ucs-00.html#anc14I do b...
