Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a pair of 6500s as distribution switches. I want to create a .1q trunk between them using a two-port Etherchannel. To provide module redundancy, one port will be on the Sup720, and the other on a 24-port SFP 1000BaseX single-fabric blade (WS-X...
I have a 6500 (SUP720, IOS) and a 4006 (SupII, CatOS.) I want to translate .1q VLANs between the two.If I configure VLAN translation on the 6500, I can translate (for example) frames coming in on VLAN 1 to VLAN 101. What happens with outgoing frames?...
Alok,Thanks for that pointer. The documentation suggests that this command allows ports with and without priority queues to be bundled into an EtherChannel. It doesn't mention anything about otherwise different queue structures, i.e. 4 thresholds vs ...
Milan,Thanks for that - I hadn't found anywhere in the command reference that mentioned outbound traffic (and I still can't - do you have a URL?!)It's only a few VLANs from each legacy environment that I need to translate, so I had considered just us...
Correct me if I'm wrong. I understand smart relay to use a secondary address if there's no response from the DHCP server on the primary. I'd need to use DHCP for two subnets on the same VLAN at the same time.
I am building a network to replace two legacy environments that I am integrating. I need to provide interim layer two connectivity on the existing VLANs. However, both legacy environments use the default VLAN1 extensively, and I can't just use second...
You need to configure your console to require a login, and then configure the password:-configure terminalline con 0loginpassword ^Z Looks like you beat me to it!
