i have a Cisco SF300-48, i configured in L3,
i configure a vlan 5 (192.168.5.1 255.255.255.0)
and a vlan 10 (192.168.10.1 255.255.255.0)
Fasehternet 2 is a PC in vlan 10 whit access mode
and Gigabiteethernet 1 is the routher of internet, in mode ...
NAT es necesario para tener internet en cualquier vlan?
but when i run comand:
ip route 192.168.5.0 255.255.255.0 192.168.10.1
The routher say: Gateway cannot be one of the addresses configured on this device.
same case on this comand:
0.0.0.0 0....
