Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello
I have two Anyconnect VPN concentrators in two data centers. Both the Concentrators are in Active/Active State. Now if a machine is trying to connect to these concentrators, I want to know how the application chooses which concentrator to con...
Hello
I have a Cisco ASA 5550 running the software version of 9.1.7.29. The SNMP groups currently have v1 and v2c configured. I would like to change it to v3. I know how to change the SNMP version in the Solar winds but I do not know how to change ...
Hello
I am Performing a software upgrade on a Cisco ASA running 8.0 to 9.1.
I know that the major change is the NAT configuration in this upgrade.
In the Pre 8.3 Version, below is the static NAT config. Here any traffic comes on the inside inte...
Hello
I have two network objects "VPN_range" and "Remote_VPN_range" defining the same subnet on my ASA IPSec Firewall.
object network VPN_range
subnet x.x.x.x 255.255.240.0
object network Remove_VPN_range
subnet x.x.x.x 255.255.240.0
Both of th...
Hello
I have a working VPN tunnel built between Cisco ASA firewall running ASA version 9.6 with one of our Vendor. The Vendor has checkpoint firewall on their end. We have recently added new traffic flows to this tunnel. When we are generating the ...
Thanks guys for your help.
I successfully upgraded those devices.
There is one thing you should look for while upgrading, if you have a cert which is configured as java code signer and if you are going to 9.1.7.23, the ASA may crash after the up...
The firewalls that I am planning to upgrdae are IPSec firewalls. I checked for IPV6 config and traffic, there isn't any. So IPV6 is not a problem anymore.
I am worried about the Certificates, do they change when I perform the upgrade?
Your comment...
