I have a new ISR4331 Router with an LTE Adv WWAN NIM.
I've configured it similar configuration to the other routers in our fleet and attempted to configure the NIM.
However I can't get it to connect. When I run 'debug dialer' I get the following error:
000744: *Aug 14 17:03:42.894 WST: Ce0/1/0 DDR: re-enable timeout
000745: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: place call
000746: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: Dialing cause ip (s=0.0.0.0, d=188.8.131.52)
000747: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: Attempting to dial lte
000748: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: Unable to dial lte.
Here is my 'sh run' with the LTE config
controller Cellular 0/1/0
lte sim data-profile 1 attach-profile 1 slot 0
lte modem dm-log output local-uf
lte modem dm-log rotation
lte modem link-recovery rssi onset-threshold -110
lte modem link-recovery monitor-timer 30
lte modem link-recovery wait-timer 30
lte modem link-recovery debounce-count 20
track 1 ip sla 1 reachability
delay down 3 up 3
ip address negotiated
dialer idle-timeout 0
no ip address
ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
Can anyone help me get it working?
Thanks in advance.
... View more