Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All, I have a PIX 501 that is connected to a westell 2200 dsl router (verizon ). I am using the safenet v 10 softremote vpn client to connect to a dlink 808 hv vpn endpoint. When I connect my vpn client thru the PIX i get a connection to my end...
Hello All,I have a pix 501 v 6.3(5), connected to my dsl router. When i connect my Netgear "Safenet" vpn client to my endpoint (Dlink 808HV) I can't ping anything on the other side. i have vpn passthru enables for IPSEC & L2TP. When I disconnect the ...
Hello All,I have a PIX 501 6.3(3) I want to upload the 6.3(5) ver of the OS via tftp server. When I issue the command"copy tftp://192.168.2.2/e:tftp-root flash:image"I get the folowing:Result of firewall command: "copy tftp://192.168.2.2/e:tftp-root ...
Thank you for your explanation,I will rate this.The Safenet Softremote client v 10 does support NAT-T,This is from their siteFAQ Description:ports that need to be open Question: What ports need to be opened on my firewall to allow IPSec traffic throu...
I aggree as well. I use a 501 on a SSB 2K3 network. Let SBS handel DHCP SBS works better that way. My only problem is using a Safenet Softremote client to access a DLINK VPN Router. The PIX will not pass the VPN traffic properly to the DLINK. Otherwi...
My apologies guys, my mind is warping the syslog error message internal ip address is 192.169.2.? not 192.168.2.? I know this is an incorrect ip for an internal natted lan, I am changing soon.Thanks
Thanks for your time I posted additional information from a syslog that i looked at it seem once I connect, and try to ping the remote side I get this in my syslog12-14-2006 09:14:07 Local4.Error 192.168.2.1 Dec 14 2006 09:14:07: %PIX-3-305006: portm...
Thanks for you time & thoughts. The Netgear "SafeNet" SoftRemote client does support NAT-T. The DLINK 808HV vpn endpoint supports NAT-T. I will have to find out what ports are used. I do get the Netgear client to connect to the DLINK 808HV thru the P...
