12-11-2006 08:52 AM - edited 03-11-2019 02:07 AM
Hello All,
I have a PIX 501 6.3(3) I want to upload the 6.3(5) ver of the OS via tftp server. When I issue the command
"copy tftp://192.168.2.2/e:tftp-root flash:image"
I get the folowing:
Result of firewall command: "copy tftp://192.168.2.2/e:tftp-root flash:image"
copying tftp://192.168.2.2/e:tftp-root to flash:image
tftp: TFTP Server Error: Invalid access to e:tftp-root
Image not installed
The ftp server log states
"Invalid access to e:tftp-root from 192.168.2.1
I tried using 2 different tftp server apps, and I get the same results, Anyone have any ideas why this is happeninig?
The e:tftp-root dir has "everyone" full control for test purposes to see if this was the problem, but still no luck.
Thanks for any aasistance.
Solved! Go to Solution.
12-11-2006 10:45 AM
Hello,
You need to specify the filename: pix635.bin (or whatever you have named it)
copy tftp://192.168.2.2/e:tftp-root/pix635.bin flash:image
Also - make sure that directory name is right - most tftp servers don't require you to specify a drive letter.
--Jason
Please rate this message if it helped solve some or all of your issue.
12-12-2006 09:22 PM
hi
try doing this
copy tftp://192.168.2.2/pix635.bin flash
i don't know which tftp server you are using but i would recommend solarwind
if still having problems try this for step by step
copy tftp flash
Address or name of remote host [127.0.0.1]? 192.168.2.2
Source file name [cdisk]? pix635.bin
copying tftp://192.168.2.2/pix635.bin to flash[yes|no|again]? yes
if helpful , please rate it
also make sure your tftp is set to both transmit and recevie mode
12-11-2006 10:45 AM
Hello,
You need to specify the filename: pix635.bin (or whatever you have named it)
copy tftp://192.168.2.2/e:tftp-root/pix635.bin flash:image
Also - make sure that directory name is right - most tftp servers don't require you to specify a drive letter.
--Jason
Please rate this message if it helped solve some or all of your issue.
12-12-2006 11:54 AM
Thanks for the info, however when I correct the line ensuring the spelling is correct
"copy tftp://192.168.2.2/e:tftp-root/pix635.bin flash:image"
I get the same messge " Invalid access to e:tftp-root/pix635.bin
any other suggestions?
T.I.A.
12-12-2006 09:22 PM
hi
try doing this
copy tftp://192.168.2.2/pix635.bin flash
i don't know which tftp server you are using but i would recommend solarwind
if still having problems try this for step by step
copy tftp flash
Address or name of remote host [127.0.0.1]? 192.168.2.2
Source file name [cdisk]? pix635.bin
copying tftp://192.168.2.2/pix635.bin to flash[yes|no|again]? yes
if helpful , please rate it
also make sure your tftp is set to both transmit and recevie mode
12-13-2006 08:19 AM
Thanks for the idea, I was using SW, and it turned out to be that in windows explorer the file pix635.bin displayed porperly, but looking in the SW dir it was listed as pix635.bin.bin, once fixed all was well.
Again many thanks for your time & knowledge to all that helped!
P.S if possilbe plese look at my new post concerninig
"portmap translation creation failed"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide