About support

support · 02-05-2007

Hello All, I have a PIX 501 that is connected to a westell 2200 dsl router (verizon ). I am using the safenet v 10 softremote vpn client to connect to a dlink 808 hv vpn endpoint. When I connect my vpn client thru the PIX i get a connection to my end...

support · 12-13-2006

Hello All,I have a pix 501 v 6.3(5), connected to my dsl router. When i connect my Netgear "Safenet" vpn client to my endpoint (Dlink 808HV) I can't ping anything on the other side. i have vpn passthru enables for IPSEC & L2TP. When I disconnect the ...

support · 12-11-2006

Hello All,I have a PIX 501 6.3(3) I want to upload the 6.3(5) ver of the OS via tftp server. When I issue the command"copy tftp://192.168.2.2/e:tftp-root flash:image"I get the folowing:Result of firewall command: "copy tftp://192.168.2.2/e:tftp-root ...

support · 02-06-2007

Thank you for your explanation,I will rate this.The Safenet Softremote client v 10 does support NAT-T,This is from their siteFAQ Description:ports that need to be open Question: What ports need to be opened on my firewall to allow IPSec traffic throu...

support · 02-05-2007

I aggree as well. I use a 501 on a SSB 2K3 network. Let SBS handel DHCP SBS works better that way. My only problem is using a Safenet Softremote client to access a DLINK VPN Router. The PIX will not pass the VPN traffic properly to the DLINK. Otherwi...

support · 12-14-2006

My apologies guys, my mind is warping the syslog error message internal ip address is 192.169.2.? not 192.168.2.? I know this is an incorrect ip for an internal natted lan, I am changing soon.Thanks

support · 12-14-2006

Thanks for your time I posted additional information from a syslog that i looked at it seem once I connect, and try to ping the remote side I get this in my syslog12-14-2006 09:14:07 Local4.Error 192.168.2.1 Dec 14 2006 09:14:07: %PIX-3-305006: portm...

support · 12-14-2006

Thanks for you time & thoughts. The Netgear "SafeNet" SoftRemote client does support NAT-T. The DLINK 808HV vpn endpoint supports NAT-T. I will have to find out what ports are used. I do get the Netgear client to connect to the DLINK 808HV thru the P...

Member Since	‎08-05-2004 07:17 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10

User Statistics

User Activity

PIX-3-305006: portmap translation creation failed for protocol 50 src insid

Can't ping remote side in vpn tunnel through a pix 501

PIX 501 will not upload image from tftp server

Re: PIX-3-305006: portmap translation creation failed for protoc

Re: Pix 501 & SBS03

Re: Can't ping remote side in vpn tunnel through a pix 501

Re: Can't ping remote side in vpn tunnel through a pix 501

Re: Can't ping remote side in vpn tunnel through a pix 501