About bdp-cisco

bdp-cisco · 02-26-2018

G'day cisco SMB switchers, I have run a couple SG300 devices for ~9 months as a test deployment. I have had a majority of the features including ACL working perfectly without issue until now. Presently, my SG300-28 is working however whenever I rem...

bdp-cisco · 04-06-2023

For clarity, in the above post I am saying the DHCP server that used to work on 10 separate vlans worked fine, but since adding a new vlan the DHCP server is handing out gateway address of the new vlan for all the vlans that used to work just fine fo...

bdp-cisco · 04-06-2023

I have exactly this issue. My SG300 has worked error-free for several years handling 10 vlans with L3 services including DHCP. I added a new vlan the other day, and since doing so the DHCP server is handing out IP addresses with the gateway being tha...

bdp-cisco · 03-06-2018

Given the multiple ways I know how to hang a sg300 (i.e. unresolved vulnerabilities, including the fact I cannot delete ACLs from my SG300 with the latest firmware without hanging it), curiously enough I am looking to replace my SG300 with a 2960. Pe...

bdp-cisco · 03-06-2018

Perhaps updating firmware would help? My sg300-28 has the option to disable.

bdp-cisco · 03-01-2018

Also since real vlans typically exist on separate subnets you probably need to config your switch as a DHCP server with appropriate pools for your 2 vlans. I'm guessing your old switch had some sort of MTU or port-based vlan setup. Those implementa...

Member Since	‎02-26-2018 02:18 PM
Date Last Visited	‎04-13-2023 09:17 PM
Posts	10

User Statistics

User Activity

SG300-28 hangs upon delete ACL binding

Re: SGs switches and odd wrong gateway issue via DHCP

Re: SGs switches and odd wrong gateway issue via DHCP

Re: Replacing a 2960 with an SG300

Re: DHCP configuration on SG-300

Re: Need some help with SF300-24PP VLAN configuration