Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi CISCO community
Maybe this is a basic question and would have been discussed before but I could not find relevant answers as per my own scenario. Let me explain topology and configuration and what I want to achieve
Topology
=========
2x CISCO...
Dear DeepakThanks for your tip. This issue of interconnectivity between Core and Access switches is resolved by setting default route as per below.ip route 0.0.0.0/0 172.22.30.1where 172.22.30.1 is VIP of our Management VLAN.All sorted out. ThanksBab...
Dear Deepak
From my laptop connected to Access SW Port eth1/1 (assigned to VLAN 221), I am able to ping all other VLANs. However, if I try to ping from Access Switch itself, I cannot do that. One reason is obvious that there is no default route con...
Hi DeepakLater I also gave IP to one of the VLANs as below. I am able to PING to network 172.22.30.0 but not to any other VLAN (which is on the core switch). interface Vlan221 no shutdown no ip redirects ip address 172.22.30.20/24================...
