Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
dears.I am configuring 11 1602 sap ap in one of our customer site...he wants three ssid one of them for wireless ip phones.the problem I am facing is when I configure the port of the ap as trunk to allow 4 vlans on it,vlan for ap and the rest three v...
hi RasikaI did exactly as you mentioned, but still on the core switch, i can see the request from my MAC address of my laptop and the core decides to put me in VLAn 1 which is the native vlan on the switches, please advise???Should i do something reg...
the output of show interface is as the following:interface GigabitEthernet1/0/38 switchport trunk native vlan 80 switchport mode trunkWhat about the BVI interface, should the ip of the interface be from the same native VLAn or what???Currently, i am ...
Dears,For now, i have fixed the issue of the SSID's but unfortunatily , i am not bale to give the wireless clients IP from the DHCP pool configured on the core switches.The customer has two core switches running in VRRP and the DHCP pool for each SS...
