Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Is there a way to change cimc ip through the apic shell or the cisco gui? The only way I've seen is with a direct console access on the data center during a reboot. Thanks a lot
Hi, Our APIC have recently raised this message : "Fail to send out Call Home HTTP message" during the renew of the smart license. It worked as expected during 2 years, but now I have this message and smart licensing release the license because apic ...
Hello, We have some issues with end point update.We have a multi pod architecture with 3 pods. When I move an EP from POD2 to POD1, the POD1 leaf can see the new EP but the POD2 leafs are not updating.I suspect a COOP issue, and i see this error on C...
Hello,We have the following log message, every 2 minutes and since few days, on our catalyst C9500-12Q stack runningCisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.3, RELEASE SOFTWARE (fc2) :Sep 27 16:24:22: %ASR100...
Hi,
We have a F5 device deployed on a tenant. I would like to use it for load balancing some applications.
The load balancer is created in one armed mode, in goto mode without PBR and on a dedicated service Bridge domain.
I create a vip in my F5,...
Hi all An update on this case. The coop database seems ok now. I've reloaded the 2 POD spines and now MPOD-CONFIGURED flag is now present and I haven't any errors anymore. When I move ands EP from POD to POD1 everything seems ok, POD1 leaf update and...
multipod config didn't change reload is planned on thursday morning ( need to plan it during some specific periods here)I will update this post after that If reload don't resolve the issue i will open a TAC case.Thanks for your help Maxime
and we have some difference with the POD1 , where we have no issues ... S101# show coop internal info globalSystem info:Local Adjacency (Dodona)Flags status: f9 or_cfg: 0 ,L2RIB Sharding status : MPOD-CONFIGUREDL2RIB Sharding status : L2RIB Sharding ...
