Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys, How are you?I need to configure ASA 5505 as central point with static IP. I already saw "PIX/ASA 7.x PIX-to-PIX Dynamic-to-Static IPsec with NAT and VPN Client Configuration Example" guide.But the problem is when I use "isakmp key password a...
Hi Guys, How are you? I have this scenario: 1) 01 PBX with 10 VoIP channels at Location A 2) IP Phonnes distributed in other locations 3) 1721 IOS IP BASE in ALL locations Do the IOS IP BASE all QoS that I will need to priorize VoIP? Thanks!
Hi Guys, How are you?I have some problem with PIX 506E NAT’s configurations. I saw that to allow traffic from lower security interface to higher security interface I need to create a STATIC NAT entry or use a NAT EXEMPTION based on ACL. But I have so...
Hi thx for reply!I found something interesting.On bugtool kit i found the bug CSCsk39154:"PIX/ASA dynamic lan to lan vpn tunnels fail negotiation with version 8.0.2.16"Ok version 8.0.2.16 but there is more:1st Found-In7.08.0(2.16) Fixed-In8.0(2.19)8....
Hi Buddys!I solved the problem! Thanks for help!I used a NAT Exemption in the subnet 10.4.0.0 and works very well!nat(inside) 0 10.4.0.0 255.255.0.0Thanks!
