Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
As long as you clear the memory, you should have enough room to upload 4mb to the Access Points. I have done it here. I ust find it easier to use a TFTP server to do the upgrade.
A lot depends on what you have around the area too. I am running 19 AIr 1200's here, and I had a problem with the RF Signal going through certain things. The pattern for the antennas varies with what kind you have. I am using the 6DBI Omni Directi...
What I have here at my place of work, is 19 Air 1200. I also have 5 remote sites that I have at least 10 air 1200's running at the other sites as well. I do use WLSE to manage everything. Also on the Air 1200's I use IP Phones, everything here see...
The best way I have found to do the upgrade is using TFTP. Just put the IP Address of the TFTP server, then browse to the file and it should take off for you.
