Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an AIRONET 1200 Accesspoint with 802.11 a,b,g (2 external Antennas for 802.11g) and 2 Clients. One Client with 802.11a,b,g and the other one with 802.11b. The scope with 802.11a is very bad, only one door or wall is enough to disturb the conne...
I have an AP AIRONET 1200 (802.11a and 802.11g) and 2 Clients. One Client with a 802.11a-Card works fine. The other Client (AIR PCM352) works (Windows CE dot.Net 4.2) with 802.11b could establish only one Connection. If the Connection is broken (bec...
Thanks for your help. The reason why it doesnt work is: the other Client (802.11a) works on 5 and on 2.4 GHz. I disabled the 2.4 GHz and it works. I dont know why the 802.11a Client disturbs the 802.11g Client, but it works an i am happy.
I dont work with an ACU. The Client is a Skeyepad with Microsoft Windows dot.Net 4.2 . There is a Driver for my WLAN Card inside the Operationsystem. I try to install all the drivers from Cisco for Dot.Net 4.2, but it doesnt work.When i reset the Air...
