Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am unable to get my repeater ap1200's to associate to a parent 1200. I receive this error on the repeater:%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Received disassociate%DOT11-4-LINK_DOWN: Interface Dot11Radio0, parent lost: as...
I do not have a radius server and I'm try to get my WLSE to manage my wds ap (1200). I have local radius running on the wds and other ap's are registered to it, but not the WLSE. Is this possible? Or is it a problem the local radius works on ports...
"authentication" was the magic word. I negelected to define any authentication on that infrastructure id. Once I defined it as open I could associate. I'll work on tightening that with LEAP as you suggested.Thanks!Ed B.
Success - I blew away the configuration on the wds/ap and started from scratch, just configuring enough for the WLSE to discover & manage the AP at first, then pushed out the WDS configuration via a template on the WLSE. I create the local radius us...
Hi:Still no luck. I shutdown and restarted the WLSE to no avail. Other AP's will register with the WDS and the WDS registers itself. I re-entered the wlccp usernames and passwords on the WDS/AP and the WLSE several times and restarted both. Did t...
Hi:Other infrastructure AP's are registering to the WDS AP. SNMP community strings are configured on the AP's and those community strings are on the AP. I assume WLCCP username/password that I enter on the WLSE is the same that I enterred on the WD...
Thank you for your response. The username/password in WLSE/WLCCP Credentials matches the line for the WLSE user under radius-server local. I'm hoping I have just configured something wrong. I included what I think are the relevant parts of my conf...
