Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Currently I am trying to get WDS setup on a test subnet. My current problem is that I am not able to authenticate thru my WDS master on any secure Vlans. I am able to get thru on an unsecure visitor vlan and also gain a DHCP IP address on it. This...
By the description in your post I would assume that you are using Microsoft Wireless Zero config as the client on your laptop. You need to move to the software client that comes with your card (Cisco, Dell, Linksys). Currently Windows is not smart ...
We have found that the Dell TrueMobile 1350's work great if you use the TrueMobile client to manage the card. It roams like it should and connects quickly.
I tested the communication with the aaa server and it would only talk to it not back. I also was working with TAC on this issue and they helped by finding that I needed to set the native Vlan on my access layer SW that the AP is hooked to. This mad...
I tested on my test setup and it will not work. My ACS server shows that that user is AUTH OK but it does not get to the WDS. I think the problem is coming from the fact that we have Vlan1 shut off for security purposes and BVI1 only likes to talk ...
I removed the ACS servers from the infrastructure AP and the client does authenticate its MAC to the ACS server and the server states that it is AUTH ok. The client never finishes authentication at this point. I do not get any errors on the ACS or ...
