Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have clients that connect via Aironet 1120ap which is behind a 1310 workgroup bridge. The workgroup bridge connects to 1310ap. The problem is clients will dhcp and have connectivity for a short period of time then complain of no network. Upon te...
We have recently implemented an ASA5510 replacing our old PIX520. One of the offices here uses a Honeywell digital video recorder that they remotely access via Honeywell's RAS remote access software. Since putting it the ASA they cannot connect to ...
Does the ASA5510 support Cisco Secure Desktop and if so, where can I download it? All my searches result in software unavailable and then I'm redirected to the software download page. Also I see no mention of the ASA appiances in the Secure Desktop...
The problem seems to be fixed thanks to Papu @ Cisco TAC. I suspected that there was a problem with the 1310ap (actually configured as root-bridge w/clients) keeping track of the "parentage" of the clients associated to the 1100ap and probably shoul...
Update:We are also experiencing an e-mail issue where the clients are getting multiple copies of a message (100+) so as a troubleshooting procedure I put the old PIX520 back in place. I tried the RAS connection and it worked fine. As far as I can s...
I have not updated the OS on the ASA if that is what you mean. Hasn't fixup been replaced by inspection? Here's what the inspection portion of my config looks like:class-map inspection_default match default-inspection-traffic!!policy-map global_pol...
