About scottkulpins

scottkulpins · 10-28-2004

Any guidance would br GREATLY appreciated! Here's the stitch:2514 (E0 - E1)I can't ping through the router from either direction; but I can ping both sides from the router itself; and the arp cahce is loaded with entries from both. Here's my latest c...

scottkulpins · 10-21-2004

HiI'm trying to set up a 2514 (11.2) in a lab environment to allow everything from one interface to be passed on to the other interface. My only goal is to have a private subnet on one interface and the other interface connected to a switch.In my cur...

scottkulpins · 10-29-2004

Exactly Right!Thank you VERY much for the help Pete!

scottkulpins · 10-28-2004

Will do!Thanks for the heads-up!

scottkulpins · 10-28-2004

Hi RickThanks for the response. The setup is a test lab, so I have easy access to both sides of the router. The default gateway on the "private" side (192.168.1.x) is set to 192.168.1.1 (the ip address of e0) and on the public side, the default gatew...

scottkulpins · 10-28-2004

Thanks LeeI should have seen that. Unfortunately, that still didn't do it. I can still ping either side from the router, but I can't ping through from either side.Does the config look OK otherwise?Current configuration: ! version 11.2 no service pass...

scottkulpins · 10-21-2004

Thanks for you help! Here's my latest configuration: (I've tried many, many, many variations!)Current configuration:!version 11.2no service password-encryptionno service udp-small-serversno service tcp-small-servers!hostname syststrouter!enable secre...

Member Since	‎10-21-2004 05:34 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7
Total Helpful Votes Received	4

User Statistics

User Activity

Can't ping from one LAN to the other

Simplest 2514 Config

Re: Can't ping from one LAN to the other

Re: Can't ping from one LAN to the other

Re: Can't ping from one LAN to the other

Re: Can't ping from one LAN to the other

Re: Simplest 2514 Config