Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When the secondary is active, the primary answers for the shared mac-address, this should not be the case. The switches get confused and intermitten problems occur. This only happens on the outside interface.Any suggestions
Thanks Scott,Here is the topology, 2 pixs 2 outside switches 2 inside switches.outside 2 2924 trunkedInside 2 6500Doing HA with cable only, The pixs flip-flop, the secondary pix's log says that it lost communication with the primary and is taking o...
sh log on secondary_____________________________________________________Lost Failover communications with mate on interface 02004-11-04 03:56:33 Local6.Alert 10.1.1.3 Nov 04 2004 03:56:33: %PIX-1-105008: (Secondary) Testing Interface 02004-11-04 03:5...
sh int outside_____________________________________________________interface ethernet0 "outside" is up, line protocol is up Hardware is i82559 ethernet, address is 00b4.0080.d29c IP address , subnet mask 255.255.255.128 MTU 1500 bytes, BW 100000 K...
