When the secondary is active, the primary answers for the shared mac-address, this should not be the case. The switches get confused and intermitten problems occur. This only happens on the outside interface.Any suggestions
Thanks Scott,Here is the topology, 2 pixs 2 outside switches 2 inside switches.outside 2 2924 trunkedInside 2 6500Doing HA with cable only, The pixs flip-flop, the secondary pix's log says that it lost communication with the primary and is taking o...
sh log on secondary_____________________________________________________Lost Failover communications with mate on interface 02004-11-04 03:56:33 Local6.Alert 10.1.1.3 Nov 04 2004 03:56:33: %PIX-1-105008: (Secondary) Testing Interface 02004-11-04 03:5...
sh int outside_____________________________________________________interface ethernet0 "outside" is up, line protocol is up Hardware is i82559 ethernet, address is 00b4.0080.d29c IP address , subnet mask 255.255.255.128 MTU 1500 bytes, BW 100000 K...