Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Another wird problem. When i connect my cisco 877W to the internet (12 Mb down, 1 Mb up) i get different download results.When i do a test (speedtest on the internet) connected to the cisco 877 LAN i get these results: max 650 kbps down and 101...
Hello,I have this strange problem. I have a cisco 877W connected through adsl2+. All seems to work fine except my ATM line drops randomly (time period between 1 and 2 hours).After the line gets dropped it connects again within 20 seconds.Any suggesti...
Hello,I wan't to setup my cisco 877 adsl router but it fails to initiate ATM.Here is some output:*Mar 1 00:33:44.643: DSL: Send ADSL_OPEN command.*Mar 1 00:33:44.643: DSL(ATM0): Using subfunction 0x0*Mar 1 00:33:44.643: LOCAL:Max noise margin for pow...
Hello,I wan't to setup my 877 router but according to my provider i have to use the folowing setup items:VPI = 0VCI = 34Multiplexing = LLCHDLC framing = neverProtocol = ENET ENCAP/LLCWho can help me with a setup file? Never heard of an encapsulation ...
I have a problem with my new Cisco 877w device.It won't bring up my ATM device. Exactly the setting on an Cisco 837 will work !!!!Who can help me !!I have attached some output from syslog
Thnx for all your help. But i think the problem is somewhere else (ISP).I have doen all the settings, but it doesn't help. So i connected a linksys wap54g and it has the same problem. Only the Zyxel router haven't got the problem.My ISP only supports...
Okay, i will try this later on.So i will set tcp-adjust mss 1350 on the ethernet interface. I don't use pppoe so i will leave this to the default.But what shall i put in the wlan ? Also tcp-adjust mss 1350 ?
Hello,I have adsl2+ and the current ios is 12.4.9T.I also installed the 12.4.9.T1, but this ios image has given me problems with the WLAN.Any suggestions ?
Hello,I had the same problems.I installed the latest IOS 12.4 (4) T1 and use the following dsl commands: dsl operating-mode auto dsl enable-training-logIt's working now !Regards,John
