Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently have a domain running 4.1(3h) that has the default host firmware package changed to a version that is not supported by the M5 blade proc's. This is causing us an issue where we cannot associate Global Service Profiles from a Global Temp...
We have 3 HXAF240C-M5SX that we are trying to deploy, but are running into errors during the DPI's validation phase. The same error displays on all 3 servers. Each server has the following config:2 Intel(R) Xeon(R) Gold 5120 28 cores192 GB DDR4-266...
Changing the host firmware revision on the global UCS Central template will not work for us due to the order of operations in how the profile is applied. The local domain default firmware bundle always takes precedence first. We do however, use yo...
Steve, We were able to resolve the issue by performing a decommission, re-ack, and then clean firmware update on the servers to 4.1(2a)C. Validation passed successfully this time and now the M2 disks are showing under the PCH 8 controller. Finger...
@Steven Tardy wrote:Hmm, Still can't tell if this is a physical issue or a configuration issue.Does the M.2 disk show under: UCSM / Equipment / Servers / Server x / Inventory / Storage / Disks / Storage Controller PCH 8 / Expand / Disk 1This disk sh...
Ran the commands on all 3 servers, and received the same results. MINI_STORAGE_PRS | disc -> | discrete | 0x0280 | na | na | na | na | na | na | From the boot menu, I only see these options: UEFI Built-in EFI ShellEnter Setup
