In a two nexus 93180YC-EX (version 7.0(3)I7(3)) topology, configured with vxlan and evpn, I'm unable to get two hosts which are on two different vlan to communicate. L2 communication works but not l3
I have this error :
nexus2# sh bgp vrf tenant-1 l2vpn evpn 10.3.26.4 BGP routing table information for VRF default, address family L2VPN EVPN Route Distinguisher: 10.0.0.200:32961 BGP routing table entry for ::::[0050.56bf.1718]::[10.3.26.4]/248, version 5069
Paths: (1 available, best #0) Flags: (0x000202) (high32 00000000) on xmit-list, is not in l2rib/evpn, is not in HW Path type: internal, path is invalid(no RMAC), no labeled nexthop AS-Path: NONE, path sourced internal to AS 10.0.0.200 (metric 41) from 10.0.0.200 (10.0.0.200) Origin IGP, MED not set, localpref 100, weight 0 Received label 10194 100194
What is the right way to configure IRB routing in a fabric ?
Thanks a lot
Nicolas Extcommunity: RT:65000:10194 RT:65000:100194 ENCAP:8
... View more