Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guy's, I am attempting to configure Tacacs+ onto my Nexus switches. I have done this on my other catalyst switches no issues and I followed the guide for the configuration.I can ping the Tacacs server and I can telnet via the correct port however ...
Hi Guys, I have recently added an additional edge switch to the network, this is identical to the previous stack so I'm basically adding a second stack into a cabinet. There was no issue's before however since I've added this new switch stack which h...
Hi Guys,I am having a little issue with our Cisco ISE setup, the issue being that for some reason cisco ISE is generating a authentication failure log from every switch we have configured. It is failing our RADIUS-TEST user which is configured locall...
Hi Seb, Thank you for your reply. So PO27 goes to another edge switch and te1/0/34 goes to another edge switch we haven't port channeled or even created a secondary link for the new stack yet thats why it isn't port channeled too. So both the PO27 an...
Hi Marvin, Thank you for your help. That seemed to resolved the failed authentication issue I had to then create a authorization rule to permit it after. I was just wondering It's great that it now passes all checks however, as we have over 100+ swit...
Basically when we look at our live logs, we are seeing errors for the username of our RADIUS account to test connectivity. I am not sure if this is the local account configured or the automate-tester causing this issue? I have also noticed when I do ...
