Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have a software VPN client that connects just fine to the PIX 501 VPN, but I cannot ping or telnet to any services on the LAN. Below is my config and results of show cry ipsec sa. I would appreciate any suggestions to fix this. It's been a w...
Hi Shikhar,I just removed that line but there is no difference in the VPN. I checked the statistics and pinging hosts on the LAN, but no change.Thanks,Deryck
Ok. I ran the command and I got:0 packet captured0 packet shownFor the record, I am testing with a Windows 7 client and a Windows XP client at the same location. On Tuesday, I will give this to another person to test from another location in case my ...
Hi Shikhar,It looks like you may be right about the packets not being encrypted. It looks like it's coming from the Pix???Below are the screenshots.Thanks,Deryck
I just set the logging to high on all areas of the Cisco VPN client. Below is the resulting log. Everything looks ok from here:Cisco Systems VPN Client Version 5.0.03.0530Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.Client Type(s):...
The one thing that I keep seeing is that there are 0 packets being sent from my Windows XP machine when connected to the VPN. Here is a result of route PRINT from Windows while connected to the VPN:====================================================...
