Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I already have AAA authentication setup on my switch. And I can use local users to login when the AAA server is unreachable.But I want to know if it is possible to use local users even when the AAA server is reachable. Something like first it chec...
I have C3750E as a coreswitch and C2960G as access swtiches. All switches are connected to coreswtich using CAT6 cable and interface is configured as trunk. When I check the interface status on coreswitch I can see some of the trunk lines are connect...
Extended IP access list VLAN20 10 permit tcp any any established 11 permit icmp any any 20 permit tcp any 192.168.20.0 0.0.0.255 eq 80 30 permit tcp any 192.168.20.0 0.0.0.255 eq 443 40 deny ip any any logExtended IP access list VLAN30...
I have a Catalyst 3750 switch acting as a core switch. I want configure access list on the switch to allow only specific ports to be accessible and deny all others.Here is my access listaccess-list 100 permit tcp any host 192.168.20.20 eq 25access-li...
Hi Karthick,Thanks for your reply.This is what I get form 3750 0009: 0C00 1000BASE-T Control Register : 0000 1100 0000 0000 000A: 4000 1000BASE-T Status Register : 0100 0000 0000 0000And on 2960 I get 3 register pages Page 0 Re...
