Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Wireless LAN Controller and I don't understand how the AP's communicate back to the controller if the AP's are not onthe same VLAN as the controller itself.
I have 1 controller and 4 AP's.
The AP's all broadcast 4 SSID's
Guest on VLAN 100Sta...
Folks,
I am just going around in circles trying to configure a site to site VPN using the CLI on the ASA 5505 in Packet Tracer 6.1.1
When I am configuring isakmp the command just do not seem to be abailable and it's really hampering my understand...
Hey Folks,
Can someone explain to me how I am able to connect to the web management interface on my WLC when the "management" interface is not assigned any VLAN identifier.
So the management interface is assigned 10.10.10.10 with a gateway of 10.10.1...
Thanks John, I appreciate the link and I have been reading the doco, there is just oone piece of the puzzle I cannot find an answer for..
If the AP gives out an IP in the range, for example 10.10.30.0/24 and the AP itself has an IP of 10.10.20.70 a...
Thank you Bratin,
One I have completed the config is there a way (besides being able to pint from one side to another ) that the data is in fact encrypted?
Kevin
