HI,Pls suggest me how to to do the following tests in FTD (Case 1)Test Item -Detect Land AttackTest procedure /Reference - Same Source IP/port to destination IP/Port to be generated on the outside  interfaceExpected result - Deny traffic should be sh...

Hi, I have Firepower [FTD] in HA, Both the Firepower devices are connected to Nexus (93180 FX).I have configured BGP between Switches and and Firepower,While doing Firepower switchover or  switch failover ( Shutting down on switch] , we observed that...

HI, I have Firepower (FTD) in HA managed through a standalone  FMC, There is  a peculiar issue, Whenever my Primary unit is active and I deploy , I get the error " Deployment failed due to communication Error", So I have to switch over to secondary u...

HI,It's taking long time in active/standby FTD switchover,Is there any mechanism to minimize the fail-over time or is there any config required?  Primary Unit to Secondary unit - it takes 5-6 seconds Secondary Unit to Primary unit - it takes 10-11 se...

Dear All,I have a standalone FMC managing 2 FTDs in HA, Recently I observed that Primary unit is showing disabled and secondary take on as active. During trouble shooting,It is found that I could not ping Manager(FMC) from primary unit [FTD]I could s...