Hi, we have two cat 6509 switches and 47 cat 3750 switches as access witches. we are spread over 14 floors. Some of the floors require additional switches due to port saturation . we are planning to add additional switches . Initial plan...
Hi,
I have a set of 3 cat 3750 switches stacked together with a single ip. I want to add one more switch , like cat 3850 or cat 9300. Stacking is ruled out. So to get the maximum throughput can I trunk , the 3850 or 9300 with (10 g)sf...
Hi,\our organization is using ASA 5520 as firewall.The inside interface of the firewall is on core switch and the default route on core switch is pointing towards the inside interface of the firewall.There are several vlans on core switch and the ...
Hi,What are the options avilable to add a cat3560 g switch to a stack of 3750x switches.?is there a connector avilable ?or is it possible to trunk via fiber ? cat 3560 has 4 sfps and 224 10/100/1000 ports with poe. cat 3750 stack ...
Hi,We have two catalyst 6506 switches with 10 gb u plinks and around 120 edge switches cat 3750-x switches. Still the module on the core wheere servers are connected is 1000mbps port.Now if we induct a nexus switch to the data...
Hi,
Thank you. One more query. If I have only one switch 3750 and one 10 g up link and one 1gb backup link to the core, can I use the free 10G to create a trunk to add another switch like 3850/ 9300? will it work ?
Regards
Hi,
Thank you for the quick reply. I have a 10 g link on one switch and 1g back up link on one switch. So One switch is free . I can use the 10 g port on that switch to trunk it with cat3850 . Only thing is that whether the same type of ...
Hi,
Thank you for the reply. All of the switches have 10 g capability and one 10g sfp port is used to trunk it to the core . Since the switches are stacked and using a single ip , can I trunk the sfps from any switch to the new 3850 or 93...
Hi,It is not an Exchange server but sun mail server sitting at DMZ. We have numerous vlans inside .like 192.168.2.0, 192.168.3.0 etc. mail server sitting in dmz with an ip 192.168.1.2 for example. Local dns cannot reslove to public. url us...